#677 Waterless Clock Cleaning Solution
Developed for the heavier load demands of cleaning clock movements. Ready to use, waterless solution. For use in an ultrasonic cleaner.
Product Code: 135
Non-ammoniated cleaner specially formulated for cleaning clock components and movements.
For use in ultrasonic, vibrasonic and manual watch cleaning machines.
US Gallon = 3.8 litres.
This solution must NOT be used directly in an ultrasonic cleaning tank.
Only for use in an ultrasonic cleaner with positioning cover and pyrex beakers with lids.
Rinse with either
#3 Watch Rinsing Solution, Ultrasonic Watch Rinsing Solution, or L&R Clock Lube
Specifications
Directions for use:
- Do Not Dilute; this product is ready to use
- To clean, place parts in accessory basket. Insert basket into ultrasonic machine 2/3 full of #677.
- Clean for 3-5 minutes, depending on volume and amount of contaminant to be removed. For clock movements that are heavily contaminated, pre-soak in L&R Clock Cleaning Solution for approx. ½ hour.
- After cleaning, shake parts to remove excess cleaning solution.
- Place parts in auxiliary pan with enough L&R Clock Lube to cover parts. Insert pan into ultrasonic machine and run for 3-5 minutes.
- Remove parts from pans and shake off or spin off excess solution.
- Dry thoroughly with an L&R Dryer.
